Clogging and backflows in restaurant floor drains have always
been untimely nuisances, because the removable floor strainer
is vulnerable to human error, negligence and misuse. We wish workers
would do diligence and be more careful about the floor strainer.
Unfortunately things don’t happen the way we wish in the
real world.
This Trash Interceptor designed only 11”
in height, it perfectly fits under any food preparation
and ware-washing sinks intercepting 98% of solid particles from
wastewater before they reach the removable floor strainer which
should only be used as an auxiliary strainer. It minimizes human
error, negligence and misuse drastically reducing the chances
of clogging and backflows.
Every food preparation and ware-washing sink should have this
Trash Interceptor under it; and anyone who pays for the drain
maintenance should use it.
| • Environmental friendly |
• Minimizes clogging &
backflows |
| • No moving parts & maintenance free |
• Lowers drain maintenance cost |
| • Minimizes solid particles in piping
system |
• Keeps grease trap/interceptor cleaner |
| |
• Eliminate the foul grease trap/interceptor
odors |
Installation Instructions
| 1) |
Attach the four adjustable
legs to the bottom of the housing. |
| 2) |
Place the unit under the sink. Carefully
align the inlet of the unit (on the top) with the vertical
drain opening of the sink or the manifold. |
| 3) |
Raise the unit by adjusting the legs
and maintain the unit in level position. |
| 4) |
Connect one 2” outlet to the floor
(or wall) drain with plumbing pipes and seal off the unused
outlet. |
1.
FPS-610A Floor
Drain Use
|
This model is for floor drain connection. The unit can be used
under single or multiple-compartment sink. This unit is equipped
with 6” adjustable legs
required by the Health Department. Its highest point is only 11”
above the floor fitting under every sink. 18
gallons per minute. The unit price is $299.95.
Order
Now
2.
FPS-610B Wall
Drain Use
|
This model is for wall drain connection. It is equipped with 9”
adjustable legs. The top of the unit ranges from
14” to 17” above the floor. The lowest point of the
outlets is 9” to 12”
above the floor. 18
gallons per minute. This unit can be installed
before the grease trap. The unit price is $299.95. Order
Now
3.
FPS-610C For
sink opening 6” – 9” use
|
This model is for ware washing sink opening 6” – 9”.
It is equipped with 10”-15.5” adjustable legs. The
top of this unit ranges from 19.5”- 25.5” above the
floor and can be installed before the grease trap. 18 gallons
per minute. The unit price is $299.95. Order
Now
  |
|
Background
|
In food preparation establishments, the garbage disposal
does a very thorough job in mixing freshwater with ground food
waste and FOG increasing the burden of grease trap/interceptor
which is designed to separate water from grease. This is why
using the garbage disposal to grind food waste is not a part
of the Best Management Practice.
In recent years commercial garbage disposals have been identified
as the greatest single source of ground food waste and FOG accumulated
in public sanitary sewer lines causing overflows. More and more
City Halls and local Water Districts have restricted or even
prohibited the continue usage of commercial garbage disposals.
Garbage
Disposal Replacement Unit (GDRU)
Instead of grinding the food
waste and wasting precious freshwater for flushing, the strainer-drawer
in GDRU strains solid particles under the pre-rinse sink when
dirty dishes are being pre-rinsed, affecting a much needed pretreatment
process of restaurant wastewater.
To ensure the food waste is not flushed down your drains, install
our GDRU to catch any solid waste before it enters the piping
system and grease trap/interceptor. This will help to eliminate
the backflows and the foul grease trap/interceptor odors.
| • Saves money on water &
electricity. |
• Environmental friendly. |
| • No moving parts to maintain. |
• Durable stainless steel
construction. |
• Keeps grease trap/interceptor
cleaner
and lowers maintenance frequency. |
• Encouraged by local governments
and
Water Districts. |
It is recommended to use our pre-rinse basket whether your sink
is in round bowl, square
or cone shape in conjunction with
the GDRU. A pre-rinse basket can function as the first
stage strainer catching big pieces of food waste above the sink.
With 2.5mm holes in its strainer-drawer, GDRU functions as the
second stage strainer catching very small particles maximizing
the effectiveness of the process.
The following are the three models available to meet practically
every existing plumbing configuration:
1.
Model GDQ-B13 Strainer-Drawer
for 3-1/2" Opening Soiled Dish Table
|
Never mind you have an existing garbage disposal
or not, it is highly recommended to have this model for your soiled
dish table to catch the very small particles. This model has the
advantage of being installed off-the-floor. It comes with a sink
strainer adaptor which fits the 3-1/2” sink opening that
is typical in square sinks. The unit price is $249.95. Order
Now
2.
GDR-A16 Replaces
any Brands of Garbage Disposal
|
This model stands on the floor with three adjustable legs. The
top of this unit ranges from 25-1/2” to 30-1/2” above
the floor fitting the standard 34” height pre-rinse table
with 5” to 8” deep bowl. It is suitable for small
and medium-sized restaurants.
The Crown Adaptor guides wastewater with very small particles
from the pre-rinse sink into the strainer-drawer of the unit.
This unit fits any shapes of pre-rinse sink bowl openings up to
9” in diameter. The unit price is $329.95. Order
Now
3.
Model GDR-A18 Replaces
Large Capacity Garbage Disposals (Even
the Soiled Dish Table without Sink Bowl) |
This model is for high volume
operations in heavy waste areas, large commercial complexes, hotels,
restaurants, food processing facilities, and cafeterias in institutions
such as municipal buildings, hospitals, churches, college campuses,
and etc.
The Crown Adaptor design ensures this
unit would fit all shapes and forms of sink openings up to 9”
in diameter. The top ranges from 25-1/2” to 30-1/2”
above the floor. It fits the standard 34” height pre-rinse
table with 5” to 8” deep bowl. The unit price is $429.95.
Order
Now
Can be converted to hanging style
by using In-Sink-Erator adaptors. Contact your plumber for details.
|
|
|
For
Soiled Dish Table without Sink Bowl
|
|
When optional
6" leg extensions are used, the top of the unit can be
raised up to 36-1/2" above the floor. The unit can be
firmly secured to the bottom of the soiled dish table. The
unit price is $39.95 for a set of 4-pieces. Order
Now |
|
|
|
How
to Select GDRUs
Stainless steel Pre-rinse Basket Round series
is custom made fitting commonly used round pre-rinse bowls. With
6 mm perforations they intercept coarse solid particles from food
waste above the sink. They are designed to work in conjunction with
the strainer-drawer (2 mm perforations) and maximize the efficiency.
There are three sizes to choose from: 12”, 15” or 18”
diameter.
The unit price is $29.95 for all sizes. Order
Now
The Pre-rinse Basket Cone series
is made of durable plastic which fit commonly used cone sharp pre-rinse
sinks. They intercept coarse solid particles from food waste above
the sink and are designed to work in conjunction with the strainer-drawer
(2 mm perforations) and maximizing the efficiency. There are three
sizes to choose from: 12”, 15” and 18”.
The unit price is $49.95 for all sizes. Order
Now
The Pre-rinse Basket
Square series is made of durable plastic which fit commonly used
square pre-rinse sinks. They intercept coarse solid particles from
food waste above the sink and are designed to work in conjunction
with the strainer-drawer (2 mm perforations) and maximizing the
efficiency. There are four sizes to choose from: 17” x 17”,
18” x 18”, 20” x 20” and 24” x 24”.
The unit price is $49.95 for all sizes. Order
Now
This Floor Strainer fits a standard size square
floor drain and is made of durable stainless steel. It has a large
capacity holding up ample solid waste. The size is 8-1/2”
x 8-1/2” x 2-3/4”.
The unit price is $24.95. Order
Now
This floor Strainer fits a standard
size square floor drain and is made of heavy duty plastic. It is
drop in type model, the size is 8-1/2” X 8-1/2” X 2-1/2”
High.
The unit price is $19.95. Order
Now
This floor strainer is made of
heavy duty plastic, can rests on top of floor drain. The size is
8-1/2” X 8-1/2” X 4” High.
The unit price is $23.95. Order
Now
Plastic bags are widely used in food service establishments
such as for walk-in coolers, freezers, restaurants, fast food operations,
delis, bakeries, sandwich shops and etc. Presently most workers
are handling plastic bags in a messy and unsanitary manner. This
new design is made of durable stainless steel. It helps to improve
the tidiness and sanitary condition in the working area. It holds
rolls with width up to 12” and has many well-thought predrilled
holes for easy installation in different working environments. Four
mounting screws are included.
The unit price is $29.95. Order
Now |